
Outdoor shower installation cost in Melbourne: what sets the price

The outdoor shower installation cost people get quoted swings a lot, and the reason is rarely the shower itself. A hot and cold shower on a wall near the existing pipes is a small job. The same shower across the yard, with a new drain to run, is a different one. This guide covers what moves the price, the ranges Australian cost guides publish, and the drainage question that catches most people out. If you want the install itself, see our outdoor shower installation page.
Quick answer: Australian cost guides put a plumbed cold-only outdoor shower at roughly $1,500 to $3,500 installed, a hot and cold shower with a connected floor drain at roughly $4,000 to $8,000, and fully built-out versions with masonry, tiling and long drainage runs at $12,000 to $20,000 or more. Those figures mostly come from Sydney and national guides, so treat them as a guide to the shape of the pricing, not a Melbourne quote. The big swings are hot or cold, and how far the pipes and the sewer drain have to travel.
Want a fixed price for your yard? Send photos of the wall and the nearest tap to 0475 407 670, Mon-Fri 7-5, Sat 8-1. Check the suburbs we cover.
What actually sets the price of an outdoor shower
Fixture prices are the easy part to see. A freestanding stainless or copper outdoor shower column can cost more than the plumbing behind it, and a plain wall-mounted head costs far less. The labour and pipework behind either one comes down to four questions.
- Cold only, or hot and cold? Cold-only runs off the nearest cold supply. Hot and cold adds a hot supply, plus something to temper and mix it.
- How far is the shower from the existing pipes? Every extra metre is more pipe, more digging or more wall chasing, and more labour.
- What is the surface? Brick, rendered block and timber fencing all take pipework differently. Hiding the pipes inside a wall or under pavers is dearer than running them on the surface.
- Where does the water go? A floor drain connected to a proper drain is a plumbing job in its own right, and often the single biggest variable.
Then there is the licence side. Victoria's Better Health guidance says all household plumbing work must be done by a licensed plumber and comply with Australian Standard AS 3500. That is why a hose and a showerhead zip-tied to a post are one thing, and a permanently plumbed shower is another. Our guide to what plumbing you can do yourself in Victoria covers where that line sits.
Typical quoted ranges, and where the numbers come from
Nobody publishes a single official price list for outdoor shower installation cost, so these ranges are pulled from Australian suppliers and installers who put their figures online. They are guides, not quotes, and some are from Sydney, where prices can differ from Melbourne.
- Solar or portable outdoor showers: one Australian pool supplier lists solar outdoor showers at $299 to $799. These are not plumbed in, so they sit outside this cost discussion.
- The fixture alone, for a plumbed unit: the same supplier says to expect $1,400 to $3,500 for the shower alone, and an Australian copper shower supplier lists its wall-mounted and freestanding units from roughly $1,680 to $3,500.
- Cold-only, installed: a Sydney renovation firm puts a basic cold-water outdoor shower at $1,500 to $3,500, covering the supply line, wall outlet, shower head and simple drainage.
- Hot and cold with a floor drain and screen: the same firm gives $4,000 to $8,000 for a mid-range setup.
- Fully designed and built: masonry enclosure, premium fixtures, tiled floor and full drainage, $12,000 to $20,000 or more on complex sites, according to that firm.
- Wider spread from one vendor: a copper shower supplier says installation averages $3,000 to $15,000. That is a seller of premium fixtures, so read it as the top end of the market.
- Plumber hourly rates: the Australian cost guides we checked quote $100 to $150 an hour for plumbing labour, with call-out and travel sometimes extra.
Where the guides disagree, the gap is mostly scope. A figure that includes the fixture, drain, screen and tiling will always beat one that is only pipework. When you compare two quotes, check they cover the same things.
Hot and cold versus cold only
This is the biggest single choice. Cold-only needs one line, normally from the nearest tap, and suits a quick rinse after a swim or the beach. The pricing is lower because there is one pipe, one isolation valve and no mixing to sort out.
Hot and cold means a second pipe back to the hot water system, plus a way to control the temperature. If the hot water unit is on the far side of the house, the pipe run is long, and the run is where the money goes. The extras on a hot and cold setup are the second supply line, the longer pipe run and a valve to keep the water at a safe temperature. Ask whether the quote includes a tempering valve, and what temperature the shower will deliver, before you compare prices.
Many people want the hot line for year-round use, and it is the reason a hot and cold shower sits in a higher price band. If you only want a rinse after the pool, ask for both options priced so you can compare them.

Distance, wall type and the fixture you pick
Distance from the existing pipes
The closest supply to the shower position is where the price starts. Backing onto the outside of a bathroom, laundry or kitchen wall is the cheapest case, because the pipes are already close. A shower at the far end of a pool area means trenching or running pipe the whole way. Photos of the proposed position, the nearest outside tap and the wall are the fastest way for a plumber to see which case you are.
Wall-mounted or freestanding
A wall-mounted shower is fixed to a solid surface, with the pipes either surface-run or chased into the wall. A freestanding column stands on its own base, so the pipework has to come up through the ground or paving underneath. That means cutting or lifting pavers, or planning the plumbing before the paving goes in. If you are building a deck or pool surround, tell the plumber early. Moving a pipe after the concrete is down costs far more than placing it first.
Water pressure and the head you choose
A large rain head wants good pressure. If the house already has weak flow, the outdoor shower will feel it too, so read our guide to low water pressure in the house before you buy a big head.

Scenario, typical range and what it covers
| Scenario | Typical published range | What that range covers |
|---|---|---|
| Solar or hose-fed portable shower, nothing plumbed | $299 to $799 | The unit only. No plumber, no drain, no compliance paperwork. |
| Cold-only wall shower near an existing supply | $1,500 to $3,500 | Supply line, isolation valve, wall outlet, shower head and simple drainage, installed by a licensed plumber. |
| Hot and cold with a connected floor drain and privacy screen | $4,000 to $8,000 | Hot and cold supply, quality fixtures, screen and a connected floor drain. |
| Full custom build: masonry, tiled floor, long drainage run | $12,000 to $20,000 or more | Designed enclosure, premium fixtures, tiling, full drainage. Often involves a builder, tiler and waterproofer as well as the plumber. |
What a quote should cover, and what is priced separately
| Normally in the plumbing quote | Often priced separately |
|---|---|
| Supply pipework from the nearest tap or hot water line | The shower fixture itself, if you are supplying it |
| Isolation valves on each line | Landscaping, paving or decking around the shower |
| Wall mounting or fixing the shower in place | Electrical work for outdoor lighting |
| Drain connection and drainage pipework | Council or water authority fees, where required |
| Compliance Certificate where the work needs one | Screens, enclosures, tiling and waterproofing, which are other trades |
The drainage question: where can an outdoor shower drain in Victoria?
This is the part many cost guides skip, and it can swing the price more than any fixture. Here is what the Victorian rules on waste water say, and where that leaves an outdoor shower.
- Council drainage is for rain. Boroondara Council states that its drainage network collects stormwater from rain that runs off surfaces, and that you can't use it to get rid of wastewater, which must connect to the sewer.
- The EPA treats soap as a stormwater pollutant. The EPA says everyone must prevent waste, including wastewater, entering stormwater drains so far as reasonably practicable, and lists shampoos and washing detergents among stormwater pollutants.
- Reusing shower water has its own rules. Victoria's Better Health guidance on greywater says untreated greywater must stay on your property and must not be discharged into any piped or surface drainage system, and that treated greywater systems need a certificate of approval. That page was last reviewed in 2013, so check current EPA and council rules.
- New below-ground sanitary drain work needs a Compliance Certificate. The Building and Plumbing Commission (BPC) says a compliance certificate is required for any construction, installation or alteration of a below-ground sanitary drain, whatever the cost.
Put together, the answer is the sewer. A plumbed outdoor shower has to drain to the sewer, not to the stormwater pit, a rubble pit or the garden, and that includes a rinse-only shower for sand and pool water. Some sellers say that water can soak into the ground, but treat that as a sales claim, not a rule. Ask the plumber to show you where the drain will connect before work starts.
The price effect is direct. A shower near an existing drain or gully is a short connection. A shower far from the sewer line needs trenching, correct falls and a drain connection, and that is what pushes quotes towards the upper ends in the table above. For a shower that gets used most days, a floor drain connected to the sewer is the option that keeps working.

Getting a firm number instead of a range
Published ranges are useful for knowing whether a quote is in the right area. They are not a substitute for a plumber looking at your yard. Prime Plumbing & Gasfitting quotes a fixed price once we have seen the job, and the fastest way to get there is to send photos.
- The wall or spot where the shower will go, with a tape or a person in frame for scale
- The nearest outside tap and where the hot water system sits
- Where the nearest gully, pit or drain is, if you know
- Whether you are buying a fixture or want help choosing one
- Whether paving, decking or a pool surround is still to be built
Ask for the quote to say whether it includes the drain connection, the Compliance Certificate, and any fixture. A Compliance Certificate is required where total work, including materials and appliances, comes to more than $750, and the licensed plumber issues it and lodges it with the BPC. Many plumbed outdoor showers will cross that line.
If a fixed price comes in much lower than the ranges above, ask what has been left out. If it comes in higher, ask what is driving it, because it is often the drain or a long pipe run.
What to settle before you ask for a quote
A few decisions make the quote faster and the price firmer.
If you are not sure about any of these, send what you have. Photos answer most of it.
Outdoor shower cost questions
For a plumbed cold-only shower, the guides we checked list $1,500 to $3,500 installed. Add hot water, a screen and a floor drain and the same guides list $4,000 to $8,000. The final figure depends on pipe distance, hot or cold, and drainage. Our fixed quote comes after seeing the job, so the real figure for your yard is one phone call away.
In the published guides, the jump is from about $1,500 to $3,500 for cold only to about $4,000 to $8,000 once a hot line, a privacy screen and a connected drain are added. The hot supply is extra pipework and parts, and if the hot water unit is far from the shower, the longer pipe run adds most of the extra.
No. The drain has to connect to the sewer. Victorian council and EPA guidance says wastewater and soaps must not go to stormwater, so the stormwater pit and the garden are both out. Have the plumber show you the sewer connection point before work starts.
You need a licensed plumber for any permanent connection to your water supply or drain, because household plumbing work in Victoria has to be done by a licensed plumber to AS 3500. A solar or portable shower that is not plumbed in is a different matter, and you can set that up yourself.
In most cases, yes. A Compliance Certificate is required where the total value of the work, including materials and appliances, is more than $750, and for any new or altered below-ground sanitary drain regardless of cost. The licensed plumber issues it to you and lodges it with the BPC. Ask for it to be included in the quote so it is not a surprise on the invoice.
A lot cheaper up front. One Australian supplier lists solar showers at $299 to $799, against $1,400 to $3,500 for a plumbed shower alone. A solar shower needs several hours of direct sunlight to heat the water and has no drain, so it suits a quick rinse more than daily use.
Outdoor shower quote checklist
Before you accept a price, check it spells out:
- Hot and cold, or cold only
- Who supplies the fixture and what it costs
- Where the water drains, in writing
- Isolation valves on each line
- Compliance Certificate included
- What is not included: paving, screens, tiling, lighting
- Whether a council or water authority approval is needed

Ready for a fixed price on your outdoor shower? Prime Plumbing & Gasfitting installs outdoor showers across Melbourne, and gives a fixed quote once the job has been seen. Alister is a licensed plumber and gasfitter, and photos of the wall, the nearest tap and the hot water system are normally enough to start. See our outdoor shower installation page for what we install.
Call 0475 407 670. Hours are Mon-Fri 7-5, Sat 8-1. Prefer to write? Use the contact page, or check the suburbs we service.





